
Monster Factory Amps are custom made, one-of-a-kind creations that you won't find anywhere else. We do all kinds of custom shop work, including modifications of existing amps. Click on the below links to see some examples or come by Jacksonville Guitar Center, 1105 Burman Drive, Jacksonville, AR 72076 and take one for a test drive.
Ulti-Marshall
We had the idea one day of wanting an amplifier the had all the classic and modern British sounds and tones in one easy-to-dial-up package, so we took an otherwise innocent AVT50 and yanked all its guts out and "revised" it. We also wanted it to have the look of a seasoned and weathered road warrior on the outside, even though it would be all brand new on the inside. Here's what we ended up with:
Two channels - Normal and Overdrive - both front panel and silent footswitch selectable (included)
High gain preamp with five beefy gain stages and a unity buffer - all powered by three 12AX7/ECC83 dual triodes.
Three-band equalization for both channels.
Normal Channel is voiced similar to a JTM45 and has a Crunch mode selectable via front panel switch that pushes the range from plexi well into JCM800 territory.
This channel also has a bright switch to go from KT66 sounds to EL34 sounds.
The Overdrive Channel picks up where the Normal Channel leaves off and carries the range through high gain JCM900 to ultra gain JCM2000.
Active rack-level effects loop driven by a 12AX7/ECC83 dual triode. A custom cable will be supplied per buyer’s preference so that the loop can be used with either line level units or pedals.
Dual bias adjust pots located on the tube deck and bias test points located on the back panel. (~340Va @ 56mA per pair = 80% dissipation)
4xEL84 tubes in the power amp delivering approximately 30 watts to any 4, 8, or 16 ohm load.
Matching 4x12, 8ohm, 200W cab with removable casters and loaded with Celestion speakers.
PRICE:
$1,150 (DOES NOT INCLUDE SHIPPING AND HANDLING... SEE HERE)
